step 1: preparing your materials
Prepare your tools and materials for a fast and organized working process.
Cut the red leather cord to a 45cm piece,
and the copper chain to 46cm long piece.
Cut 4 pieces of oval chain to 15cm long each.
Step 2 : connecting the leather to the chain
Take the small oval chain and twist it on the leather cord and copper chain, until they are held tightly together.
For a clean finish use an open oval loop to close the oval chain tightly.
Open and close the loop with the help of the plier tool.
Put same E6000 glue inside the metal finishes and slip the leather inside.
Connect the chain and leather to the metal connector and then hang a clasp on one side and a big 8mm jump ring with an extension chain on the other side.
Step 3 : hang the pendents
Connect two 5mm jump rings for each small pendent.
Open and close the big 8mm jump rings with the plier tool and hang the pendents on the leather.
Step 4 : setting the stones
Use the E6000 glue to embed the small stones in there place on the metal elements.
wonderful!
The necklace is ready!
Enjoy your new beautiful Swarovski necklace.
Gita team.
