step 1: preparing your materials
Prepare your work environment. Organizing your tools and materials will help
you work faster and more efficient.
Hexagon and round loops chain – two pieces of 4cm long each.
Gold flat gourmet Chain – 40cm long.
Gold oval loops chain – two pieces of 24cm long each.
Step 2 : connecting the necklace base
Use 6mm jump rings and connect two 4cm long pieces of the hexagon and round loops chain at both ends of the cup chain.
The flat gourmet chain is connected at the inner side of the cup chain with 5mm jump rings to the jump rings at the ends.
Also connect the clasp on one side and the extension chain with metal label and Swarovski stone on the other side.
Step 3 : hanging the second chain
Use two 5mm jump rings to connect the anchor charms to the starfish pendent.
Find the center of the oval loop chain and hang it on the anchor charm.
Take the chain a little bit back words to create a kind of loop.
Now, slide the ends of the chain inside the loop and pull it until it holds the anchor charm tightly.
Open one small oval loop from the chain with the cutting tool and use it to connect two loops of the chain, so that the knot will not open.
Use 5mm jump ring to hang both ends of the oval loop chain to the jump rings at the back of the necklace.
Step 4: setting the stones
Place the stone in the center of the stone setting and with the help of the setting tool bend the prongs towards the stone in order to embed it.
Apply small amount of the E6000 glue inside the small holes on the starfish and place the small stones in there place.
In the same way, set the small stones on the metal elements in the cup chain.
wonderful!
The necklace is ready!
Enjoy your new beautiful Swarovski necklace.
Gita team.
